• A 6" attached valance is included as standard.
• Premium stained or painted pine headrail (1-1/2" depth x 3/4" high) included as standard.
• Cord lock and pulley controls included as standard.
• Minimum Width: 8"
• Maximum Width: 120" (or the maximum width of the pattern which ever is less)
• Minimum Height: 12"
• Maximum Height: 144"
• Flush Inside Mount depth required: 2"
• Minimum Inside Mount depth required: 1/2"

• UpRight is convenient continuous clutch control.
• Shades with UpRight are made with a 2-1/2” headrail. Extended New York Brackets are used due to the larger headrail size and do not increase the shade’s distance from the wall. “L” Brackets are an alternative OM installation method. 2” Screws are an alternative IM installation method.
• Minimum Width: 12"
• Flush IM depth required: 3"
• Minimum IM depth required: 1".
• UpRight controls add approximately 1” to the shades stacking height.
• Color coordinated chain controls are standard on
  UpRight.

Duo-Fold Controls Option

• Duo-Fold is unique topdown/ bottom-up control option. The shade may be raised from the bottom or lowered from the top.
• Duo-Fold is not available with UpRight controls.
• An additional valance may be ordered on the back (exterior) side of the shade to hide the
  hardware.
• Available with standard roman shade only.
• Available with 2 on 1 headrail
• Not available with Prestige Lift
• Not available on Hobbled Shade
• Not available with 3 on 1 headrail
• Minimum Width: 12"
• Maximum Width: 72"

PRICING : Add $125 to the retail price of the shade

Multiple shades on one Headrail Option

• Two-on-Ones & Three-on-Ones are multiple shades mounted on a single headrail, usually with a
  common valance.
• Provide the sizes of each individual shade AND the total width of the unit. The sizes of the individual shades must add up to the total width.
• The maximum total width for Two-on-Ones & Three-on- Ones is 144”, but the common valance is limited to the width of the material . Valances with a butting
  seam are available.
• The workroom will make allowances for inside mount and the spaces between the shades (1/2”).

Turned Headrail Option

• A “Turned Headrail” makes the headrail’s depth 3/4” and the height 1-1/2”. This is most commonly used in cases of limited mounting depth.
• Turned headrails are not available on UpRight and Duo-Fold shades.
• Returns are not available.
• 3” screws are available for IM.
• 2” screws are offered for OM.
• New York and “L” brackets are not available.

Hold down brackets Option

• Hold Down Brackets are used to secure the bottom of the shade. They are most commonly used
  when a shade is mounted on a door.
• A steel rod is inserted inside the entire width of the bottom hem and protrudes 1/4” on each side for installation.
• Hold Downs are not recommended for inside mounted
  shades.

Cut Out Option

• Cut Outs are used to avoid obstacles such as soffits, shelving, door handles, window mounted air-conditioners and steps.
• Cut Outs may be taken from any corner, edge or even the center of a shade.
• There are some physical limits to the size and location of a Cut Out. Please provide a detailed
  Cut Out diagram, like the one
  below, with your order.

Mitered Headrails Option

• Mitered headrails are used to butt shades meeting in a corner or bay.
• Note: mitered shades usually butt together so closely that they cannot be raised to the same height.
• Any miter other than an exact 90˚ angle requires a template or an exact drawing of the actual angle.
• Miters are not available on Hobbled Roman Shades.
• When ordering, give the measurement from the corner
  to where you want the shade to end.

Waterfall Shade Option

• Both the Classic and Hobbled Shades may be ordered with
  the shade mounted to the front of the headrail, eliminating
  the need for a valance. With a Waterfall shade, the controls
  are concealed behind the shade. This is sometimes called an “Old Style” shade

PRICING : Refer to the appropriate Fabric Price Chart

Cut material Option

• Cut Material may be ordered in any pattern. There are many decorative uses for Cut Material: table runners, place mats, inserts for fabric frame shutters, wall coverings
  and craft projects.
• Cut material may be hemmed upon request at no charge.

          SiteMap

© 1999-2011 The Callaloo Company All rights reserved.

No part of this Website may be copied for private or commercial use without written consent from The Callaloo Company, whether in part, or whole, by any means known to humankind, either historically, presently, or in the future.